Yokelink Provide Fasteners for Sewage Water Treatment / Nuts for Sewage Water Treatment / Bolts for Sewage Water Treatment, Best Price Guarantee.
T Head Bolt and nut for Waterwork
Yokelink Mechanical Joint T Head Bolt and nut for Waterwork are accordance with ANSI/AWWA C111/A21.11. Material including High strength low Alloy Steel ; and 304, 316 Stainless Steel. Diameters have 5/8”, 3/4”, 1” and 1-1/4”. The Length from 3” to 9”, Special thread lengths and non-standard lengths available on request. Teflonn Coating with different color is available for these bolt and Nuts.
Stainless Steel Fasteners for Sewage Water Treatment
Increase in population results in the growing need for treat ment of sewage and sewage treatment plants, due to the ever increasing demand for sewage treatment plants, we ate Sunflex Metal are readily manufacturing the below range of bolting and stainless steel fasteners for the sewage industry.
| Grade | Diameter | Type | Application area |
| SS 316 / AISI 316 | M-16 to M-72 | Austenic steel | Used for flange connections in water pipelines |
| SS 316 L / AISI 316 L | M-16 to M-72 | Austenic steel | Used for flange connections in water pipelines, in high corrosion atmosphere |
| 316S311 | M-16 to M-72 | Austenic steel | Used for flange connections in water pipelines, in high corrosion atmosphere & where greater strength is required for joints |
Often treating sewage is not a easy job, with very very high contents of gases it is also a major reason for corrosion of bolts which are installed in sewage treatment plants. Which is why engineers and contractors prefer to use 316S31 or SS 316L grade of stainless steel bolts in these areas and applications.
Application |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||